Seam sealer

[AK]

Been a few years since I’ve done this.... but what’s best for removal of seam sealer?

Wire brush on drill or something like that?
_________________
Impreza Race Car - SLS/SMRC
Mini Race Car - SMRC
911 - 1981 Air Cooled 3.0
500 - 1969 Fiat 500 L
Toureg 262 RLine
Track Scotland

[Vroomtshh]

Heat and a sharp scraper first, then wire brush on a drill

[AK]

Yuk... gets pretty smoky with heat. Heat works well on sound deadening bitumen
_________________
Impreza Race Car - SLS/SMRC
Mini Race Car - SMRC
911 - 1981 Air Cooled 3.0
500 - 1969 Fiat 500 L
Toureg 262 RLine
Track Scotland

[marshal-alan]

adam, mount one of these on a angle grinder https://www.screwfix.com/p/norton-expert-twist-knotted-wire-wheel-brush-115mm/7917h

from experience with rusty metal drill mounted ones are too soft and lack elbow grease
_________________
Race marshal found at knockhill and anywhere lunatics crash

opinions are my own and not those of any organisation I am involved with

[AK]

Ta will give that a go
_________________
Impreza Race Car - SLS/SMRC
Mini Race Car - SMRC
911 - 1981 Air Cooled 3.0
500 - 1969 Fiat 500 L
Toureg 262 RLine
Track Scotland

[AK]

Good suggestion Alan - worked well
_________________
Impreza Race Car - SLS/SMRC
Mini Race Car - SMRC
911 - 1981 Air Cooled 3.0
500 - 1969 Fiat 500 L
Toureg 262 RLine
Track Scotland

[marshal-alan]

no probs mate, used to cleaning up rusty metal, chipping hammer to shift big lumps then into it with one of those bad boys
_________________
Race marshal found at knockhill and anywhere lunatics crash

opinions are my own and not those of any organisation I am involved with