top

Mk2 Golf TFSI/DSG race car build

Post new topic Reply to topic trackscotland.co.uk Forum Index | Projects Goto page Previous  1, 2, 3, 4, 5, 6  Next   Page 3 of 6

Wed Jan 14, 2015 8:45 pm PostPost subject:
Kceeal
user


Joined: 08 Jun 2012
Posts: 224
Location: Ardallie, Aberdeenshire

Reply with quote

323mm Discs. Same size as on the Seat LCR.
Not an OEM 330mm available to fit. So it would have to be 2 piece which you pay handsomely for.
Will have a hunt around and see if i can pick up a set but will give the 323mm a shot first.
_________________
Mk2 Golf GTI racer
Back to top
View user's profile Send private message
 
Wed Jan 14, 2015 10:23 pm PostPost subject:
Vroomtshh
user


Joined: 23 Apr 2014
Posts: 162

Reply with quote

330 mm discs from an alfa fit but need the pcd re drilling. Doubt it would be worth the effort though
Back to top
View user's profile Send private message
 
Thu Jan 15, 2015 10:36 am PostPost subject:
scottish scrutineer
established user


Joined: 27 Mar 2013
Posts: 571

Reply with quote

HummuH wrote:
I'm really looking forward to seeing this out in S&S.

<snip>
I know you had some feedback before but would be worth getting a clear steer in advance from Scrutineers on exactly what they will need you to do with the WMI system. Don't want to turn up at first race meeting and get a shock. Let me know if you need any help with that.
<snip>


Water Methanol Injection is not premitted I'm afraid. The only things that can go in are pump fuel and air.
_________________
Renny
MSA Scrutineer
Back to top
View user's profile Send private message
 
Thu Jan 15, 2015 10:53 am PostPost subject:
HummuH
SMRC S&S Rep


Joined: 05 Jan 2012
Posts: 2407
Location: Sniffing petrol

Reply with quote

scottish scrutineer wrote:
HummuH wrote:
I'm really looking forward to seeing this out in S&S.

<snip>
I know you had some feedback before but would be worth getting a clear steer in advance from Scrutineers on exactly what they will need you to do with the WMI system. Don't want to turn up at first race meeting and get a shock. Let me know if you need any help with that.
<snip>


Water Methanol Injection is not premitted I'm afraid. The only things that can go in are pump fuel and air.


But water injection is fine as intake is free?

Renny, can you let David know exactly what he'll have to do with his system i.e. will it have to be removed lock-stock or will he be OK to run with water as long as he/you can ensure there is no methanol being used?
_________________
MD Racing
SMRC Sports & Saloons Facebook Page
Back to top
View user's profile Send private message
 
Thu Jan 15, 2015 11:33 am PostPost subject:
Vroomtshh
user


Joined: 23 Apr 2014
Posts: 162

Reply with quote

HummuH wrote:
scottish scrutineer wrote:
HummuH wrote:
I'm really looking forward to seeing this out in S&S.

<snip>
I know you had some feedback before but would be worth getting a clear steer in advance from Scrutineers on exactly what they will need you to do with the WMI system. Don't want to turn up at first race meeting and get a shock. Let me know if you need any help with that.
<snip>


Water Methanol Injection is not premitted I'm afraid. The only things that can go in are pump fuel and air.


But water injection is fine as intake is free?

Renny, can you let David know exactly what he'll have to do with his system i.e. will it have to be removed lock-stock or will he be OK to run with water as long as he/you can ensure there is no methanol being used?


Thats what I was told when I asked. Methanol was not allowed, but water injection was. There was a joke about how I'd have to drink some to prove it was methanol free Laughing
Back to top
View user's profile Send private message
 
Thu Jan 15, 2015 3:43 pm PostPost subject:
Kceeal
user


Joined: 08 Jun 2012
Posts: 224
Location: Ardallie, Aberdeenshire

Reply with quote

Vroomtshh wrote:
HummuH wrote:
scottish scrutineer wrote:
HummuH wrote:
I'm really looking forward to seeing this out in S&S.

<snip>
I know you had some feedback before but would be worth getting a clear steer in advance from Scrutineers on exactly what they will need you to do with the WMI system. Don't want to turn up at first race meeting and get a shock. Let me know if you need any help with that.
<snip>


Water Methanol Injection is not premitted I'm afraid. The only things that can go in are pump fuel and air.


But water injection is fine as intake is free?



Renny, can you let David know exactly what he'll have to do with his system i.e. will it have to be removed lock-stock or will he be OK to run with water as long as he/you can ensure there is no methanol being used?


Thats what I was told when I asked. Methanol was not allowed, but water injection was. There was a joke about how I'd have to drink some to prove it was methanol free Laughing


Running water will suit me fine.....and it means i can leave the system in
Smile
Are there any other cars running water injection in S&S?
You are welcome to take a swig from my WI tank... Laughing
_________________
Mk2 Golf GTI racer
Back to top
View user's profile Send private message
 
Thu Jan 15, 2015 4:19 pm PostPost subject:
Kceeal
user


Joined: 08 Jun 2012
Posts: 224
Location: Ardallie, Aberdeenshire

Reply with quote

Vroomtshh wrote:
330 mm discs from an alfa fit but need the pcd re drilling. Doubt it would be worth the effort though


Are the centres of the discs not 70mm also on the Alfa discs? Not keen on that route tbh....
_________________
Mk2 Golf GTI racer
Back to top
View user's profile Send private message
 
Thu Jan 15, 2015 8:15 pm PostPost subject:
Kceeal
user


Joined: 08 Jun 2012
Posts: 224
Location: Ardallie, Aberdeenshire

Reply with quote

Bit of Polybushing going down. Should tighten slack alice up a wee bit..














_________________
Mk2 Golf GTI racer
Back to top
View user's profile Send private message
 
Thu Jan 15, 2015 11:05 pm PostPost subject:
HummuH
SMRC S&S Rep


Joined: 05 Jan 2012
Posts: 2407
Location: Sniffing petrol

Reply with quote

Were at exactly the same stage Smile

Does your subframe not have lips where the rear wishbone bushes locate which cut washers go over?
_________________
MD Racing
SMRC Sports & Saloons Facebook Page
Back to top
View user's profile Send private message
 
Thu Jan 15, 2015 11:23 pm PostPost subject:
Kceeal
user


Joined: 08 Jun 2012
Posts: 224
Location: Ardallie, Aberdeenshire

Reply with quote

HummuH wrote:
Were at exactly the same stage Smile

Does your subframe not have lips where the rear wishbone bushes locate which cut washers go over?


Yes it does. washer top and bottom as well as two spacers.
Keeps everything nice and tight.
Some difference compared with standard over the counter type bushes with a thin shim tube in it. Not surprised those type don't last long.
_________________
Mk2 Golf GTI racer
Back to top
View user's profile Send private message
 
Fri Jan 16, 2015 1:40 am PostPost subject:
chorlton
established user


Joined: 20 Jul 2011
Posts: 2005
Location: location location

Reply with quote

Ali, did you do all this stuff 2 Helga?
_________________
There's nothing wrong with the car except that it's on fire.
"Murray Walker"
Back to top
View user's profile Send private message
 
Fri Jan 16, 2015 1:42 pm PostPost subject:
scottish scrutineer
established user


Joined: 27 Mar 2013
Posts: 571

Reply with quote

HummuH wrote:
scottish scrutineer wrote:
HummuH wrote:
I'm really looking forward to seeing this out in S&S.

<snip>
I know you had some feedback before but would be worth getting a clear steer in advance from Scrutineers on exactly what they will need you to do with the WMI system. Don't want to turn up at first race meeting and get a shock. Let me know if you need any help with that.
<snip>


Water Methanol Injection is not premitted I'm afraid. The only things that can go in are pump fuel and air.


But water injection is fine as intake is free?

Renny, can you let David know exactly what he'll have to do with his system i.e. will it have to be removed lock-stock or will he be OK to run with water as long as he/you can ensure there is no methanol being used?


Ian Afek is the Championship Elig Scrutineer, give him a call. His details are in the Regs.
_________________
Renny
MSA Scrutineer
Back to top
View user's profile Send private message
 
Fri Jan 16, 2015 2:01 pm PostPost subject:
HummuH
SMRC S&S Rep


Joined: 05 Jan 2012
Posts: 2407
Location: Sniffing petrol

Reply with quote

scottish scrutineer wrote:
Ian Afek is the Championship Elig Scrutineer, give him a call. His details are in the Regs.


Cheers Renny, I've asked Ian to comment.
_________________
MD Racing
SMRC Sports & Saloons Facebook Page
Back to top
View user's profile Send private message
 
Fri Jan 16, 2015 9:46 pm PostPost subject:
Kceeal
user


Joined: 08 Jun 2012
Posts: 224
Location: Ardallie, Aberdeenshire

Reply with quote

HummuH wrote:
scottish scrutineer wrote:
Ian Afek is the Championship Elig Scrutineer, give him a call. His details are in the Regs.


Cheers Renny, I've asked Ian to comment.


Cheers guys,

Will get in touch.
_________________
Mk2 Golf GTI racer
Back to top
View user's profile Send private message
 
Fri Jan 16, 2015 9:55 pm PostPost subject:
Kceeal
user


Joined: 08 Jun 2012
Posts: 224
Location: Ardallie, Aberdeenshire

Reply with quote

Polybushed Subframe c/w 25mm ARB ready to fit.


_________________
Mk2 Golf GTI racer
Back to top
View user's profile Send private message
 
Post new topic Reply to topic trackscotland.co.uk Forum Index | Projects Goto page Previous  1, 2, 3, 4, 5, 6  Next   Page 3 of 6

View previous topic
View next topic
Display posts from previous:   




You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum